# Math for Game Programmers 05 – Vector Cheat Sheet

This is the long due fifth article in this series. If you aren’t comfortable with vectors, you might want to take a look at the first four articles in this series before: Introduction, Vectors 101, Geometrical Representation of Vectors, Operations on Vectors.

This cheat sheet will list several common geometrical problems found in games, and how to solve them with vector math.

## Complete list of basic vector operations

But first, a little review.

For this, I assume that you have a vector class readily available. This is mostly 2D-focused, but everything works the same for 3D, except for differences concerning vector product, which I will assume to return just a scalar in the 2D case, representing the “z” axis. Any case that only applies to 2D or 3D will be pointed out.

Strictly speaking, a point is not a vector – but a vector can be used to represent the distance from the origin (0, 0) to the point, and so, it is perfectly reasonable to just use vectors to represent positions as if they were points.

I expect the class to give you access to each of the components, and to the following operations (using C++ style notation, including operator overloading – but it should be easy to translate to any other language of your choice). If a given operation is not available, you can still do it manually, either by extending the class or creating a “VectorUtils” class. The examples below are usually for 2D vectors – but 3D is usually simply a matter of adding the z coordinate following the pattern of x and y.

• Vector2f operator+(Vector2f vec): Returns the sum of the two vectors. (In a language without operator overloading, this will probably be called add(). Similarly for the next few ones.)
a + b = Vector2f(a.x + b.x, a.y + b.y);
• Vector2f operator-(Vector2f vec):Â Returns the difference between the two vectors.
a – b = Vector2f(a.x – b.x, a.y – b.y);
• Vector2f operator*(Vector2f vec):Â Returns the component-wise multiplication of the vectors.
a * b = Vector2f(a.x * b.x, a.y * b.y);
• Vector2f operator/(Vector2f vec):Â Returns the component-wise division of the vectors.
a / b = Vector2f(a.x / b.x, a.y / b.y);
• Vector2f operator*(float scalar): Returns the vector with all components multiplied by the scalar parameter.
a * s = Vector2f(a.x * s, a.y * s);
s * a = Vector2f(a.x * s, a.y * s);
• Vector2f operator/(float scalar): Returns the vector with all components divided by the scalar parameter.
a / s = Vector2f(a.x / s, a.y / s);
• float dot(Vector2f vec): Returns the dot product between the two vectors.
a.dot(b) = a.x * b.x + a.y * b.y;
• float cross(Vector2f vec): (2D case) Returns the z component of the cross product of the two vectors augmented to 3D.
a.cross(b) = a.x * b.y – a.y * b.x;
• Vector3f cross(Vector3f vec): (3D case) Returns the cross product of the two vectors.
a.cross(b) = Vector3f(a.y * b.z – a.z * b.y, a.z*b.x – a.x*b.z, a.x*b.y – a.y*b.x);
• float length(): Returns the length of the vector.
a.length() = sqrt(a.x * a.x + a.y * a.y);
• float squaredLength(): Returns the square of the length of the vector. Useful when you just want to compare two vectors to see which is longest, as this avoids computing square roots
a.squaredLength() = a.x * a.x + a.y * a.y;
• float unit(): Returns a vector pointing on the same direction, but with a length of 1.
a.unit() = a / a.length();
• Vector2f turnLeft(): Returns the vector rotated 90 degrees left. Useful for computing normals. (Assumes that y axis points up, otherwise this is turnRight)
a.turnLeft = Vector2f(-a.y, a.x);Â
• Vector2f turnRight():Â Returns the vector rotated 90 degrees right. Useful for computing normals. (Assumes that y axis points up, otherwise this is turnLeft)
a.turnRight = Vector2f(a.y, -a.x);
• Vector2f rotate(float angle): Rotates the vector by the specified angle. This is an extremely useful operation, though it is rarely found in Vector classes. Equivalent to multiplying by the 2×2 rotation matrix.
a.rotate(angle) = Â Vector2f(a.x * cos(angle) – a.y * sin(angle), a.x * sin(angle) + a.y * cos(angle));
• float angle():Â ReturnsÂ the angle that the vector points to.
a.angle() = atan2(a.y, a.x);

## Simple cases – warming up

### Case #01 – Distance between two points

You probably know that this is done with the Pythagorean theorem, but the vectorial way is simpler. Given two vectors a and b:

`float distance = (a-b).length();`

### Case #02 – Alignment

Sometimes, you want to align an image by its center. Sometimes, by its top-left corner. Or sometimes, by its top-center point. More generally, you can do alignment using a vector whose two components go from 0 to 1 (or even beyond, if you’d like), giving you full control of alignment.

```// imgPos, imgSize and align are all Vector2f
Vector2f drawPosition = imgPos + imgSize * align```

### Case #03 – Parametric Line Equation

Two points define a line, but it can be tricky to do much with this definition. A better way to work with a line is its parametric equation: one point (“P0″) and a direction vector (“dir”).

```Vector2f p0 = point1;
Vector2f dir = (point2 - point1).unit();```

With this, you can, for example, get a point 10 units away by simply doing:

`Vector2f p1 = p0 + dir * 10;`

### Case #04 – Midpoint and interpolation between points

Say you have vectors p0 and p1. The midpoint between them is simply (p0+p1)/2. More generally, the line segment defined by p0 and p1Â can be generated by varying t between 0 and 1 in the following linear interpolation:

`Vector2f p = (1-t) * p0 + t * p1;`

At t = 0, you get p0; at t = 1, you get p1; at t = 0.5, you get the midpoint, etc.

### Case #05 – Finding the normal of a line segment

You already know how to find the direction vector of a line segment (case #03). The normal vector is a 90 degree rotation of that, so just call turnLeft() or turnRight() on it!

## Projections using the Dot Product

The dot product has the incredibly useful property of being able to compute the length of a vector’s projection along the axis of another. To do this, you need the vector that you’ll project (“a“) and a unit vector (so make sure that you call unit() on it first!) representing the direction (“dir“). The length is then simply a.dot(dir). For example, if you have a = (3, 4) and dir = (1, 0), thenÂ a.dot(dir) = 3, and you can tell that this is correct, because (1, 0) is the direction vector of the x axis. In fact, a.x is always equivalent to a.dot(Vector2f(1, 0)), and a.y is equivalent to a.dot(Vector2f(0, 1)).

Because the dot product between aÂ and bÂ is also defined as |a||b|cos(alpha) (where alpha is the angle between the two), the result will be 0 if the two vectors are perpendicular, positive if the angle between them is less than 90, and negative if greater. This can be used to tell if two vectors point in the same general direction.

If you multiply the result of that dot product by the direction vector itself, you get the vector projected along that axis – let’s call that “at” (t for tangent). If you now do a – at, you get the part of the vector that is perpendicular to the dir vector – let’s call that “an” (n for normal). at + an = a.

### Case #06 – Determining direction closest to dir

Say that you have a list of directions represented as unit vectors, and you want to find which of them is the closest to dir. Simply find the largest dot product between dir and a vector in the list. Likewise, the smallest dot product will be the direction farthest away.

### Case #07 – Determining if the angle between two vectors is less than alpha

Using the equation above, we know that the angle between two vectors a and b will be less than alpha if the dot product between their unit vectors is less than cosine of alpha.

```bool isLessThanAlpha(Vector2f a, Vector2f b, float alpha) {
return a.unit().dot(b.unit()) < cos(alpha);
}```

### Case #08 – Determining which side of a half-plane a point is on

Say that you have an arbitrary point in space, p0, and a direction (unit) vector, dir. Imagine that an infinite line goes by p0, perpendicular to dir, dividing the plane in two, the half-plane that dirÂ points to, and the half-plane that it does not point to. How do I tell whether a point p is in the side pointed to by dir? Remember that dot product is positive when the angle between vectors is less than 90 degrees, so just project and check against that:

```bool isInsideHalfPlane(Vector2f p, Vector2f p0, Vector dir) {
return (p - p0).dot(dir) >= 0;
}```

### Case #09 – Forcing a point to be inside a half-plane

Similar to the case above, but instead of just checking, we’ll grab the projection and, if less than 0, use it to move the object -projection along dir, so it’s on the edge of the half-plane.

```Vector2f makeInsideHalfPlane(Vector2f p, Vector2f p0, Vector dir) {
float proj = (p - p0).dot(dir);
if (proj >= 0)Â return p;
else return p - proj * dir;
}```

### Case #10 – Checking/forcing a point inside a convex polygon

A convex polygon can be defined to be the intersection of several half-planes, one for each edge of the polygon. Their p0 is either vertex of the edge, and their dir is the edge’s inner-facing normal vector (e.g., if you wind clockwise, that’d be the turnRight() normal). A point is inside the polygon if and only if it’s inside all the half-planes. Likewise, you can force it to be inside the polygon (by moving to the closest edge) by applying the makeInsideHalfPlane algorithm with every half-plane.Â [ops, this actually only works if all angles are >= 90 degrees]

### Case #11 – Reflecting a vector with a given normal

Pong-like game. Ball hits a sloped wall. You know the ball’s velocity vector and the wall’s normal vector (see case #05). How do you reflect it realistically? Simple! Just reflect the ball’s normal velocity, and preserve its tangential velocity.

```Vector2f vel = getVel();
Vector2f dir = getWallNormal(); // Make sure this is a unit vector
Vector2f velN = dir * vel.dot(dir); // Normal component
Vector2f velT = vel - velN; // Tangential component
Vector2f reflectedVel = velT - velN;```

For more realism, you can multiply velT and velN by constants representing friction and restitution, respectively.

### Case #12 – Cancelling movement along an axis

Sometimes, you want to restrict movement in a given axis. The idea is the same as above: decompose in a normal and tangential speed, and just keep tangential speed. This can be useful, for example, if the character is following a rail.

## Rotations

### Case #13 – Rotating a point around a pivot

If used to represent a point in space, the rotate() method will rotate that point around the origin. That might be interesting, but is limiting. Rotating around an arbitrary pivot vector is simple and much more useful – simply subtract the pivot from it, as if translating so the origin IS the pivot, then rotate, then add the pivot back:

```Vector2f rotateAroundPivot(Vector2f p, Vector2f pivot) {
return (pos - pivot).rotate(angle) + pivot;
}```

### Case #14 – Determining which direction to turn towards

Say that you have a character that wants to rotate to face an enemy. He knows his direction, and the direction that he should be facing to be looking straight at the enemy. But should he turn left or right? The cross product provides a simple answer: curDir.cross(targetDir) will return positive if you should turn left, and negative if you should turn right (and 0 if you’re either facing it already, or 180 degrees from it).

## Other Geometric Cases

Here are a few other useful cases that aren’t that heavily vector-based, but useful:

### Case #15 – Isometric world to screen coordinates

Isometric game. You know where the (0, 0) of world is on the screen (let’s call that point origin and represent it with a vector), but how do you know where a given world (x, y) is on the screen? First, you need two vectors determining the coordinate base, a new x and y axes. For a typical isometric game, they can be bx = Vector2f(2, 1)Â and by = Vector2f(-2, 1)Â – They don’t necessarily have to be unit vectors. From now, it’s straightforward:

```Vector2f p = getWorldPoint();
Vector2f screenPos = bx * p.x + by * p.y + origin;```

Yes, it’s that simple.

### Case #16 – Isometric screen to world coordinates

Same case, but now you want to know which tile the mouse is over. This is more complicated. Since we know that (x’, y’) = (x * bx.x + y * by.x, x * bx.y + y * by.y) + origin, we can first subtract origin, and then solve the linear equation. Using Cramer’s Rule,Â except that we’ll be a little clever and use our 2D cross-product (see definition at the beginning of the article) to simplify things:

```Vector2f pos = getMousePos() - origin;
float demDet = bx.cross(by);
float xDet = pos.cross(by);
float yDet = bx.cross(pos);
Vector2f worldPos = Vector2f(xDet / demDet, yDet / demDet);```

And now you don’t need to do that ugly find-rectangle-then-lookup-on-bitmap trick that I’ve seen done several times before.

## 334 ResponsesLeave one →

1. #### Rachellegef

/  2016-08-16

Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ ÑÐ¾Ð²Ð¼ÐµÑÑ‚Ð¸Ð¼Ð¾ÑÑ‚Ð¸ Ð¼ÑƒÐ¶Ñ‡Ð¸Ð½Ð° Ñ€Ð°Ðº Ð¶ÐµÐ½Ñ‰Ð¸Ð½Ð° Ð»ÐµÐ² – 8 Ð·Ð½Ð°Ðº Ð¿Ð¾ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñƒ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ ÐµÐ¶ÐµÐ´Ð½ÐµÐ²Ð½Ñ‹Ð¹

2. #### Marvinvus

/  2016-08-16

Ð•ÑÐ»Ð¸ Ð¾Ð½ Ñ‡Ð°ÑÑ‚Ð¾ ÑƒÐ¿Ð¾Ð¼Ð¸Ð½Ð°ÐµÑ‚ÐµÐµ Ð¸Ð¼Ñ Ð²Ð¾ ÑÐ½Ðµ Ð¸Ð»Ð¸ Ð¶Ðµ, Ð¾Ð³Ð¾Ð²Ð¾Ñ€Ð¸Ð²ÑˆÐ¸ÑÑŒ, Ð½Ð°Ð·Ñ‹Ð²Ð°ÐµÑ‚ Ð²Ð°Ñ ÐµÐµ .. Ð’Ð»ÑŽÐ±Ð»ÐµÐ½Ð½Ñ‹Ðµ Ñ…Ð¾Ñ‚ÑÑ‚ Ð²Ð¸Ð´ÐµÑ‚ÑŒ Ñ€ÑÐ´Ð¾Ð¼ Ñ ÑÐ¾Ð±Ð¾Ð¹Ñ‡ÐµÐ»Ð¾Ð²ÐµÐºÐ°, Ð»ÑŽÐ±Ð¾Ð²ÑŒ ÐºÐ¾Ñ‚Ð¾Ñ€Ð¾Ð³Ð¾ ÑÑ‚Ð¾Ð»ÑŒ Ð¶Ðµ .. Ð¾ Ð¿Ñ‹ÑˆÐ½Ð¾Ð¹ Ð¸ÐºÑ€Ð°ÑÐ¸Ð²Ð¾Ð¹ ÑÐ²Ð°Ð´ÑŒÐ±Ðµ Ð½Ðµ ÑÑ‚Ð¾Ð¸Ñ‚, Ð´Ð°Ð¶Ðµ ÐµÑÐ»Ð¸ Ð²Ð°Ð¼ Ð·Ð°Ð¼ÑƒÐ¶ Ð½ÐµÐ²Ñ‚ÐµÑ€Ð¿ÐµÐ¶. .. ÐŸÐ¾Ð¼Ð½Ð¸Ñ‚Ðµ, Ñ‡Ñ‚Ð¾, Ð½Ð°Ñ‡Ð°Ð² ÑƒÑ…Ð°Ð¶Ð¸Ð²Ð°Ñ‚ÑŒ Ð·Ð° ÑÐ²Ð¾Ð¸Ð¼ Ð¼ÑƒÐ¶Ñ‡Ð¸Ð½Ð¾Ð¹ ÐºÐ°Ðº Ð·Ð° Ð¼ÑƒÐ¶ÐµÐ¼ ,

3. #### Audreapracy

/  2016-08-16

ÐŸÐµÑ€ÑÐ¾Ð½Ð°Ð»ÑŒÐ½Ñ‹Ð¹ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ Ð’Ð¾Ð´Ð¾Ð»ÐµÑ ÑÐ¼Ð¾Ð¶ÐµÑ‚ ÑƒÐºÐ°Ð·Ð°Ñ‚ÑŒ Ð¾Ð±Ð»Ð°ÑÑ‚Ð¸, Ð² ÐºÐ¾Ñ‚Ð¾Ñ€Ñ‹Ñ… Ð´Ð°Ð½Ð½Ð¾Ð³Ð¾ Ð¿Ñ€ÐµÐ´ÑÑ‚Ð°Ð²Ð¸Ñ‚ÐµÐ»Ñ

4. #### Nicholeham

/  2016-08-16

ÐºÐ°Ðº ÑÐ½ÑÑ‚ÑŒ Ð¿Ð¾Ñ€Ñ‡Ñƒ ÑÐ°Ð¼Ð¾ÑÑ‚Ð¾ÑÑ‚ÐµÐ»ÑŒÐ½Ð¾ Ð±ÐµÑÐ¿Ð»Ð°Ñ‚Ð½Ð¾ Ð´Ð¾Ð¼Ð°. Ð“ÐÐ”ÐÐÐ˜Ð• ÐžÐÐ›ÐÐ™Ð

5. #### Jamikagom

/  2016-08-16

Ð§Ñ‚Ð¾ Ð·Ð°ÑÑ‚Ð°Ð²Ð»ÑÐ»Ð¾ ÐÐ²ÐµÐ»Ñ Ð´ÐµÐ»Ð°Ñ‚ÑŒ ÑÐ²Ð¾Ð¸ Ð¿Ñ€ÐµÐ´ÑÐºÐ°Ð·Ð°Ð½Ð¸Ñ ? Ð’ÐµÐ´ÑŒ Ð¸Ð¼ÐµÐ½Ð½Ð¾ Ð¾Ð½ ÑƒÐºÐ°Ð·Ð°Ð» Ñ‚Ð¾Ñ‡Ð½ÑƒÑŽ Ð´Ð°Ñ‚Ñƒ ÑÐ¼ÐµÑ€Ñ‚Ð¸ Ð•ÐºÐ°Ñ‚ÐµÑ€Ð¸Ð½Ñ‹ II â€” 6 Ð½Ð¾ÑÐ±Ñ€Ñ 1796 Ð³Ð¾Ð´Ð° Ð² 9

6. #### Lindyflake

/  2016-08-16

ÐŸÐ¾ÐµÐ¼Ð° Â«Ð¡Ð¾Ð½ Â» Ð¢Ð°Ñ€Ð°ÑÐ° Ð¨ÐµÐ²Ñ‡ÐµÐ½ÐºÐ° â€“ Ð²Ð¸ÐºÑ€Ð¸Ð²Ð°Ð»ÑŒÐ½Ð° Ð¿Ð¾ÐµÐ¼Ð° , Ð´Ðµ Ð³Ð¾ÑÑ‚Ñ€Ð¾ Ð²Ð¸ÑÐ¼Ñ–ÑÐ½Ñ– Ð¿Ð¾Ñ‚Ð²Ð¾Ñ€Ð½Ñ–, Ð°Ð½Ñ‚Ð¸Ð½Ð°Ñ€Ð¾Ð´Ð½Ñ–

7. #### DanielleMr

/  2016-08-16

ÐÑƒÐ¼ÐµÑ€Ð¾Ð»Ð¾Ð³Ð¸Ñ · Ð§Ð¸ÑÐ»Ð¾ Ð¡ÑƒÐ´ÑŒÐ±Ñ‹ · Ð§Ð¸ÑÐ»Ð¾ ÐŸÑƒÑ‚Ð¸ · Ð Ð°ÑÑ‡ÐµÑ‚ Ð§Ð¸ÑÐ»Ð° Ð Ð°ÑÑÑ‡Ð¸Ñ‚Ð°Ñ‚ÑŒ ÑÐ¾Ð²Ð¼ÐµÑÑ‚Ð¸Ð¼Ð¾ÑÑ‚ÑŒ . Ð”Ð°Ñ‚Ð° : 3-Ðµ Ð¸ÑŽÐ½Ñ 2014 Ð³Ð¾Ð´Ð° Ð’Ñ€ÐµÐ¼Ñ: 1:26 (UTC +4) Ð Ð¸Ñ‚Ð¼ Ð¸Ð½Ð´Ð¸Ð²Ð¸Ð´ÑƒÐ°Ð»ÑŒÐ½Ð¾Ð³Ð¾ Ð»ÑƒÐ½Ð½Ð¾Ð³Ð¾ Ð¼ÐµÑÑÑ†Ð° Ð¿Ð¾ÑÑ‚Ð¾ÑÐ½ÐµÐ½ Ð¾Ñ‚ Ñ€Ð¾Ð¶Ð´ÐµÐ½Ð¸Ñ Ñ‡ÐµÐ»Ð¾Ð²ÐµÐºÐ° Ð¸ Ð´Ð¾ ÐµÐ³Ð¾ ÑÐ¼ÐµÑ€Ñ‚Ð¸ .

8. #### Ramonamib

/  2016-08-16

Ð Ð°Ð·Ð²Ð¸Ñ‚ÑŒ ÑÐ²Ð¾Ð¸ ÑÐ¿Ð¾ÑÐ¾Ð±Ð½Ð¾ÑÑ‚Ð¸ Ð¼Ð¾Ð¶ÐµÑ‚ Ð»ÑŽÐ±Ð¾Ð¹! Ð’ ÐœÐ¾ÑÐºÐ²Ðµ ÐµÑÑ‚ÑŒ Ð´Ð°Ð¶Ðµ Ð¨ÐºÐ¾Ð»Ñ‹, ÐºÐ¾Ñ‚Ð¾Ñ€Ñ‹Ðµ Ð½Ð° ÑÑ‚Ð¾Ð¼ ÑÐ¿ÐµÑ†Ð¸Ð°Ð»Ð¸Ð·Ð¸Ñ€ÑƒÑŽÑ‚ÑÑ. ÐšÐ½Ð¸Ð³ Ñ‚Ð°ÐºÐ¶Ðµ Ð¿Ð¾Ð»Ð½Ð¾, Ð¿Ð¾ÑÐ¼Ð¾Ñ‚Ñ€Ð¸Ñ‚Ðµ Ñ‚Ð¾Ð³Ð¾ Ð¶Ðµ Ð‘Ð»Ð°Ð²Ð¾

9. #### Daphnelot

/  2016-08-16

3 Ñ€Ð¸Ñ‡ÐµÑ€ÐºÐ°Ñ€Ð°. Ð¤Ð¾Ñ€Ñ‚ÐµÐ¿Ð¸Ð°Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð½Ñ†ÐµÑ€Ñ‚ â„–4 " Ð—Ð°ÐºÐ»Ð¸Ð½Ð°Ð½Ð¸Ñ " – 9 ÐÐ¾ÑÐ±Ñ€Ñ 2010 – ÐŸÐ¾Ð³Ñ€ÑƒÐ¶ÐµÐ½Ð¸Ðµ Ð² ÐºÐ»Ð°ÑÑÐ¸ÐºÑƒ. ÐÐ°Ñ‡Ð¸Ð½Ð°ÑŽÑ‰Ð¸Ð¼ ÑÐ»ÑƒÑˆÐ°Ñ‚ÐµÐ»ÑÐ¼ · Ð¤Ð¾Ñ€ÑƒÐ¼ 100 Ð»ÐµÑ‚ BPO / 100 Jahre Berliner Philharmonisches Orchester [ Ð²Ð¸Ð´ÐµÐ¾ –

10. #### JannetBora

/  2016-08-16

ÐÐºÑ‚Ð¸Ð²Ð½Ñ‹Ð¹ ÑÐ½Ð²Ð°Ñ€ÑŒ Ñ Ð¿ÐµÑ€ÐµÐ¼ÐµÑ‰ÐµÐ½Ð¸ÑÐ¼Ð¸, Ð¿Ð¾ÐµÐ·Ð´ÐºÐ°Ð¼Ð¸ Ð±ÑƒÐ´ÐµÑ‚ Ð±Ð¾Ð³Ð°Ñ‚ Ð½Ð° Ð½Ð¾Ð²Ñ‹Ðµ ÑÐ²ÑÐ·Ð¸ Ð¸

11. #### JulianGarl

/  2016-08-16

Ð¡ÐµÐºÑÑƒÐ°Ð»ÑŒÐ½Ð°Ñ Ð½ÑƒÐ¼ÐµÑ€Ð¾Ð»Ð¾Ð³Ð¸Ñ – Ð²Ð½Ð¸Ð¼Ð°Ð½Ð¸Ðµ Ð½Ð° Ñ€Ð°Ð±Ð¾Ñ‚Ñƒ Ð¸ Ð±Ð»Ð¸Ð·ÐºÐ¸Ñ…, Ð»Ð¸Ð±Ð¾ Ð±ÑƒÐ´ÐµÑ‚Ðµ Ð¾Ñ‡ÐµÐ½ÑŒ Ñ‡Ð°ÑÑ‚Ð¾ Ð¼ÐµÐ½ÑÑ‚ÑŒ ÑÐ²Ð¾Ð¸Ñ… Ð¿Ð°Ñ€Ñ‚Ð½ÐµÑ€Ð¾Ð² Ð² Ð¿Ð¾Ð¸ÑÐºÐ°Ñ… Ð½Ð¾Ð²Ñ‹Ñ… Ð¾Ñ‰ÑƒÑ‰ÐµÐ½Ð¸Ð¹ Ð² Ð¿Ð¾ÑÑ‚ÐµÐ»Ð¸. 1 .

12. #### EdnaCandy

/  2016-08-16

ÐÐ°ÑÐºÐ¾Ð»ÑŒÐºÐ¾ Ð¿Ñ€Ð°Ð²Ð´Ð¸Ð²Ñ‹ Ð²Ð¸Ñ€Ñ‚ÑƒÐ°Ð»ÑŒÐ½Ñ‹Ðµ Ð³Ð°Ð´Ð°Ð½Ð¸Ñ, Ð½ÑƒÐ¼ÐµÑ€Ð¾Ð»Ð¾Ð³Ð¸Ñ Ð¸Ð»Ð¸ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ð½Ð° ÑÐµÐ³Ð¾Ð´Ð½Ñ, Ð“Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿

13. #### Ingerpoili

/  2016-08-16

Ð“Ð°Ð´Ð°Ð½Ð¸Ðµ Ð¿Ð¾ Ð¿Ð»Ð°Ð¼ÐµÐ½Ð¸ ÑÐ²Ð¾Ð¸Ð¼Ð¸ ÐºÐ¾Ñ€Ð½ÑÐ¼Ð¸ ÑƒÑ…Ð¾Ð´Ð¸Ñ‚ Ð´Ð°Ð»ÐµÐºÐ¾Ðµ Ð¿Ñ€Ð¾ÑˆÐ»Ð¾Ðµ , ÐºÐ¾Ð³Ð´Ð° ÐÐ¾ ÐµÑÐ»Ð¸ ÐºÐ°Ñ€Ñ‚Ð° Ð³Ð¾Ð²Ð¾Ñ€Ð¸Ñ‚ Ð¾ Â«ÑÐ²Ð¾ÐµÐ¼Â», Ñ‚Ð¾ ÑÑ‚Ð¾ ÑƒÐºÐ°Ð·Ñ‹Ð²Ð°ÐµÑ‚ Ð½Ð° Ð¾ÑˆÐ¸Ð±ÐºÑƒ Ð² Ñ€Ð°ÑÐºÐ»Ð°Ð´Ðµ.

14. #### DenyseJidS

/  2016-08-16

Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð¿Ð¾ Ñ€ÑƒÐºÐµ ÐºÐ¾Ð»Ð¸Ñ‡ÐµÑÑ‚Ð²Ð¾ Ð±Ñ€Ð°ÐºÐ¾Ð² – > · Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð¿Ð¾ Ñ€ÑƒÐºÐµ Ð»ÐµÐ²ÑˆÐ° – > · Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð¿Ð¾ Ñ€ÑƒÐºÐµ Ð½Ð°ÑƒÑ‡Ð¸Ñ‚ÑŒÑÑ – > · Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð¿Ð¾ Ñ€ÑƒÐºÐµ Ð½Ð°ÑƒÑ‡Ð¸Ñ‚ÑŒÑÑ – > · Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ

15. #### Corafoody

/  2016-08-16

Ð§Ñ‚Ð¾Ð±Ñ‹ ÑƒÐ·Ð½Ð°Ñ‚ÑŒ, Ñ‡Ñ‚Ð¾ Ñ…Ð¾Ñ‚ÑÑ‚ ÑÐºÐ°Ð·Ð°Ñ‚ÑŒ Ð²Ð°Ð¼ Ð³Ð°Ð´Ð°Ð½Ð¸Ñ ÑÑ‚Ð°Ñ€Ð¸Ð½Ð½Ñ‹Ð¹ Ð¿Ð°ÑÑŒÑÐ½Ñ Ð¾Ð½Ð»Ð°Ð¹Ð½

16. #### ClarindaGoW

/  2016-08-16

Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð½Ð° Ð²ÑÑ‚Ñ€ÐµÑ‡Ñƒ ÐºÐ°Ð¼Ð½Ð¸ Ð¿Ð¾ Ð·Ð¾Ð´Ð¸Ð°ÐºÑƒ Ð½Ð°Ð¸Ð½Ð° Ð²Ð»Ð°Ð´Ð¸Ð¼Ð¸Ñ€Ð¾Ð²Ð° Ð³Ð°Ð´Ð°Ð½Ð¸Ñ ÑÐºÐ¾Ð»ÑŒÐºÐ¾ Ð·Ð½Ð°ÐºÐ¾Ð²

17. #### KatiEarneks

/  2016-08-16

Ð¥Ð˜Ð ÐžÐœÐÐÐ¢Ð˜Ð¯ â€” (Ð¾Ñ‚ Ð³Ñ€ÐµÑ‡. cheir Ñ€ÑƒÐºÐ° Ð¸ manteia Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ ) Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð¿Ð¾ Ð»Ð¸Ð½Ð¸ÑÐ¼ Ð¸ Ð±ÑƒÐ³Ð¾Ñ€ÐºÐ°Ð¼ Ð»Ð°Ð´Ð¾Ð½Ð¸

18. #### JaimeclEX

/  2016-08-16

Ð§Ð¸ÑÐ»Ð¾ 16 ÑÑ‡Ð¸Ñ‚Ð°ÐµÑ‚ÑÑ Ð¾ÑÐ¾Ð±Ñ‹Ð¼, Ð¼Ð¸ÑÑ‚Ð¸Ñ‡ÐµÑÐºÐ¸Ð¼ Ñ‡Ð¸ÑÐ»Ð¾Ð¼. ÐžÐ½Ð¾ Ð¼Ð¾Ð¶ÐµÑ‚ Ð¿Ñ€Ð¸Ð½ÐµÑÑ‚Ð¸

19. #### Lisitstymn

/  2016-08-16

Ð“Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ ÑÐ¾Ð²Ð¼ÐµÑÑ‚Ð¸Ð¼Ð¾ÑÑ‚ÑŒ Ð·Ð½Ð°ÐºÐ¾Ð² Ð»ÐµÐ² Ð¸ Ñ€Ð°Ðº Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ð¸ ÑÐ¾Ð²Ð¼ÐµÑÑ‚Ð¸Ð¼Ð¾ÑÑ‚Ð¸ Ð¼ÑƒÐ¶Ñ‡Ð¸Ð½Ð° Ð±Ð»Ð¸Ð·Ð½ÐµÑ†Ñ‹

20. #### Rettaexcalp

/  2016-08-16

Ð¼ÑƒÐ¶Ñ‡Ð¸Ð½Ð° Ð“Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ 2014 Ð³Ð¾Ð´Ð° Ð“Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ Ð¡Ñ‚Ñ€ÐµÐ»ÐµÑ† Ð½Ð° 2014 Ð³Ð¾Ð´, Ð—Ð´Ð¾Ñ€Ð¾Ð²ÑŒÐµ. Ð£

/  2016-08-16

Ð’Ð¸Ð´ÐµÑ‚ÑŒ ÐÐ¿ÐµÐ»ÑŒÑÐ¸Ð½ Ð²Ð¾ ÑÐ½Ðµ . / (Ð›ÑŽÐ±Ð¾Ð²Ð½Ñ‹Ð¹ ÑÐ¾Ð½Ð½Ð¸Ðº). Ð•ÑÐ»Ð¸ Ð²Ð°Ð¼ Ð¿Ñ€Ð¸ÑÐ½Ð¸Ð»Ð¾ÑÑŒ, Ñ‡Ñ‚Ð¾ Ð²Ñ‹ ÐµÐ´Ð¸Ñ‚Ðµ Ð°Ð¿ÐµÐ»ÑŒÑÐ¸Ð½ , Ð·Ð½Ð°Ñ‡Ð¸Ñ‚ Ð²Ð°Ð¼ Ð½Ðµ Ð¸Ð·Ð±ÐµÐ¶Ð°Ñ‚ÑŒ Ñ€Ð°Ð·Ð»ÑƒÐºÐ¸ Ð¸ Ð´Ð°Ð¶Ðµ Ñ€Ð°Ð·Ñ€Ñ‹Ð²Ð°

22. #### DanielKiz

/  2016-08-16

http://helpextra.ru/praktika Ð Ð¸Ñ‚ÑƒÐ°Ð»Ñ‹ Ð² Ð¿Ð¾Ð»Ð½Ð¾Ð»ÑƒÐ½Ð¸Ðµ – ÑÑ‚Ð¾ ÑÐ°Ð¼Ñ‹Ðµ Ð±Ð»Ð°Ð³Ð¾Ð¿Ñ€Ð¸ÑÑ‚Ð½Ñ‹Ðµ Ð´Ð½Ð¸ Ð´Ð»Ñ Ð¾Ñ‚ÐºÑ€Ñ‹Ñ‚Ð¸Ñ

23. #### SamuelThap

/  2016-08-16

ÐšÐ°Ðº Ñ€Ð°ÑÑÑ‡Ð¸Ñ‚Ð°Ñ‚ÑŒ Ð´Ð°Ñ‚Ñƒ ÑÐ¼ÐµÑ€Ñ‚Ð¸ Ð½ÑƒÐ¼ÐµÑ€Ð¾Ð»Ð¾Ð³Ð¸Ñ . Ð’ÐµÑ€Ð½ÑƒÑ‚ÑŒÑÑ Ðº Ð½Ð°Ñ‡Ð°Ð»Ñƒ. ÐŸÑ€Ð¾Ñ„Ð¸Ð»ÑŒ. 05.06.2013, 12:43. elena-ruko. ÐÐ´Ð¼Ð¸Ð½Ð¸ÑÑ‚Ñ€Ð°Ñ‚Ð¾Ñ€. ÐÐ²Ð°Ñ‚Ð°Ñ€Ð°

24. #### SinaOffeshy

/  2016-08-16

Ð’Ð¾Ñ‚ Ð¾Ð´Ð½Ð¾ Ð¸Ð· ÐŸÐ¾ÑÐ»ÐµÐ´Ð½Ð¸Ñ… ÐŸÑ€ÐµÐ´ÑÐºÐ°Ð·Ð°Ð½Ð¸Ð¹ Ð’Ð°Ð½Ð³Ð¸ : Ð Ð¾ÑÑÐ¸Ñ .. Ð‘ÑƒÐ´ÑƒÑ‰ÐµÐµ Ð Ð¾ÑÑÐ¸Ð¸ Ð’Ð°Ð½Ð³Ðµ Ð¿Ñ€ÐµÐ´ÑÑ‚Ð°Ð²Ð»ÑÐ»Ð¾ÑÑŒ ÑÐ»ÐµÐ´ÑƒÑŽÑ‰Ð¸Ð¼: "Ð’ÑÐµ Ð±ÑƒÐ´ÐµÑ‚ Ñ‚Ð°ÑÑ‚ÑŒ, Ñ Ð¿Ñ€ÐµÐ´ÑÐºÐ°Ð·Ð°Ð½Ð¸ÑÐ¼Ð¸ ÐÐ¾ÑÑ‚Ñ€Ð°Ð´Ð°Ð¼ÑƒÑÐ° , Ð¸ Ð´Ñ€ÑƒÐ³Ð¸Ñ… Ð¿Ñ€Ð¾Ñ€Ð¾ÐºÐ¾Ð² Ð¸ Ð¿Ñ€Ð¾Ð²Ð¸Ð´Ñ†ÐµÐ² ÑÐ²Ð¸Ñ‚ÑŒÑÑ Ð² Ð Ð¾ÑÑÐ¸ÑŽ.

25. #### Brendasenia

/  2016-08-16

Ð˜Ð½Ñ‚ÐµÑ€Ð½ÐµÑ‚-Ð³Ð°Ð·ÐµÑ‚Ð° " Ð”Ð¶ÐµÐ½Ñ‚Ñ€Ð¸ " Ð’Ñ‹Ð¿ÑƒÑÐºÐ¸ 2014 Ð³Ð¾Ð´Ð° · Ð’Ñ‹Ð¿ÑƒÑÐºÐ¸ 2013 Ð³Ð¾Ð´Ð° ·

/  2016-08-16

Ð“Ð°Ð´Ð°ÑŽ Ð½Ð° Ð¢Ð°Ñ€Ð¾ Ð±ÐµÑÐ¿Ð»Ð°Ñ‚Ð½Ð¾ .. 1111 Ð´Ð»Ñ ÑÑ‚Ð¾Ð³Ð¾ Ñ€Ð°ÑÐºÐ»Ð°Ð´Ð° Ð´Ð°Ñ‚Ð° Ñ€Ð¾Ð¶Ð´ÐµÐ½Ð¸Ñ Ð½Ðµ Ð¾Ð±ÑÐ·Ð°Ñ‚ÐµÐ»ÑŒÐ½Ð°, Ð¸Ð¼Ñ Ð¶ÐµÐ»Ð°Ñ‚ÐµÐ»ÑŒÐ½Ð¾. (1) · Ð¡Ð¾Ð½ – Ð¿Ð¾Ð¹Ð¼Ð°Ð»Ð° ÑÐ²Ð°Ð´ÐµÐ±Ð½Ñ‹Ð¹ Ð±ÑƒÐºÐµÑ‚ (7) · ÐšÐ°Ðº ÑƒÐ¶Ð¸Ñ‚ÑŒÑÑ ÑÐ¾ Ð›ÑŒÐ²Ð¾Ð¼? (46) · Ð“Ð°Ð´Ð°Ð½Ð¸Ðµ Ð½Ð° Ð¸Ð³Ñ€Ð°Ð»ÑŒÐ½Ñ‹Ñ… ÐºÐ°Ñ€Ñ‚Ð°Ñ… (16)

27. #### Ardellmege

/  2016-08-16

Ð£ Ñ€Ñ‹Ñ†Ð°Ñ€ÐµÐ¹ ÑÐ¼ÐµÑ€Ñ‚Ð¸ Ð´Ð°Ð¶Ðµ ÐµÑÑ‚ÑŒ ÑÐ²Ð¾Ð¹ ÑÐ¾Ð±ÑÑ‚Ð²ÐµÐ½Ð½Ñ‹Ð¹ ÐšÐ¾Ð½ÑŒ ÑÐ¼ÐµÑ€Ñ‚Ð¸ ÐÐºÐµÑ€ÑƒÑÐ°! .. Ð¾Ð±Ð»ÐµÐ³Ñ‡Ð¸Ñ‚ÑŒ Ð¶Ð¸Ð·Ð½ÑŒ Ñ…Ð¸Ð»Ð°Ð¼, Ð° Ð¿Ñ€Ð¸ Ñ‚Ð°Ð½ÐºÐµ Ð½Ð°Ñ…Ð¾Ð´ÑÑ‰Ð¸Ð¼ÑÑ Ð¿Ñ€Ð¸ ÑÐ¼ÐµÑ€Ñ‚Ð¸, Ð±Ð»Ð°Ð³Ð¾Ð´Ð°Ñ€Ñ

28. #### LelaLENDAGO

/  2016-08-16

Ð Ð²Ð¾Ñ‚ ÐÐ»ÐµÐºÑÐ°Ð½Ð´Ñ€ Ð¨ÐµÐ¿Ñ Ð±Ñ‹Ð» Ð½Ðµ Ñ€Ð°Ð´ Ð½ÐµÐ¾Ð±Ñ…Ð¾Ð´Ð¸Ð¼Ð¾ÑÑ‚Ð¸ Ð´ÐµÐ»Ð°Ñ‚ÑŒ Ñ‚Ð°ÐºÐ¾Ð¹ Ð¿Ñ€Ð¾Ð³Ð½Ð¾Ð·. ÐžÐ½ ÑÑ‡Ð¸Ñ‚Ð°ÐµÑ‚, Ñ‡Ñ‚Ð¾, Ð·Ð°Ð´Ð°Ð²Ð°Ñ Ð²Ð¾Ð¿Ñ€Ð¾ÑÑ‹ Ð¾ Ð±ÑƒÐ´ÑƒÑ‰ÐµÐ¼, Ñ‡ÐµÐ»Ð¾Ð²ÐµÐº Ð´Ð¾Ð»Ð¶ÐµÐ½

29. #### QuyenRite

/  2016-08-16

EÑÐ»Ð¸ Ð’aÐ¼ Ð¿Ð¾Ð½Ñ€Ð°Ð²Ð¸Ð»Ð¾ÑÑŒ Ð¾Ð½Ð»Ð°Ð¹Ð½ Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð½Ð° Ð¿Ð°Ñ€Ð½Ñ , Ð¾Ð±ÑÐ·Ð°Ñ‚ÐµÐ»ÑŒÐ½Ð¾ Ð¸ÑÐ¿Ñ‹Ñ‚Ð°Ð¹Ñ‚Ðµ Ð½Ð° ÑÐµÐ±e Ð´Ñ€ÑƒÐ³Ð¸e Ð³Ð°Ð´Ð°Ð½Ð¸Ñ, Ð¿Ñ€ÐµÐ´ÑÑ‚Ð°Ð²Ð»ÐµÐ½Ð½Ñ‹e Ð½Ð° Ð½Ð°ÑˆeÐ¼ ÑÐ°Ð¹Ñ‚Ðµ:

30. #### AntoniaSa

/  2016-08-16

Ð¢ÐµÑÑ‚ Ð½Ð° ÑÐ¾Ð²Ð¼ÐµÑÑ‚Ð¸Ð¼Ð¾ÑÑ‚ÑŒ Ð¿Ð¾ Ð´Ð°Ñ‚Ðµ Ñ€Ð¾Ð¶Ð´ÐµÐ½Ð¸Ñ. Ð­Ñ‚Ð¾Ð³Ð¾ Ð½Ðµ ÑÐºÑ€Ð¾ÑŽ.Ð´Ð¾Ð½ÐµÑ‡ÐºÐ°.Ð¯ ÑÑ‚Ð¾Ð»ÑŒÐºÐ¾ Ð½ÐµÐ¶Ð½Ð¾ÑÑ‚Ð¸ Ñ…Ð¾Ñ‡Ñƒ Ñ‚ÐµÐ±Ðµ ÐµÑ‰Ðµ Ñ‚ÐµÑÑ‚, Ð´Ñ‹Ñ…Ð°Ð½ÑŒÐµ,Ñ‚Ñ‹ Ð½Ðµ ÑÐ¼Ð¾Ð¶ÐµÑˆÑŒÐœÐ½Ðµ Ð² ÑÑ‚Ð¾Ð¹ Ð¿Ñ€Ð¸Ñ…Ð¾Ñ‚Ð¸

31. #### Shannaper

/  2016-08-16

Ð³Ð°Ð´Ð°Ð½Ð¸Ñ Ð½Ð° Ð¿Ð°Ñ€Ð½Ñ Ð¾Ð½Ð»Ð°Ð¹Ð½ Ð±ÐµÑÐ¿Ð»Ð°Ñ‚Ð½Ð¾ | Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ Ð½Ð° Ð·Ð°Ð¼ÑƒÐ¶ÐµÑÑ‚Ð²Ð¾ Ð¾Ð½Ð»Ð°Ð¹Ð½ . ÐœÐ¾Ð³Ð»Ð° ÐµÐ³Ð¾ Ð²Ð¸Ð´ÐµÑ‚ÑŒ Ð¸

32. #### YuetteKaf

/  2016-08-16

ÐŸÑ€Ð¸Ð²Ð¾Ñ€Ð¾Ñ‚ Ð² ÐºÐµÐ¼ÐµÑ€Ð¾Ð²Ð¾, Ð¿Ñ€Ð¸Ð²Ð¾Ñ€Ð¾Ñ‚ Ð»ÑŽÐ±Ð¸Ð¼Ð¾Ð³Ð¾, Ð¿Ñ€Ð¸Ð²Ð¾Ñ€Ð¾Ñ‚ Ð½Ð° Ð»ÑŽÐ±Ð¾Ð²ÑŒ , Ð·Ð°Ð³Ð¾Ð²Ð¾Ñ€Ñ‹, Ð³Ð°Ð´Ð°Ð½Ð¸Ñ

33. #### Chassidykr

/  2016-08-16

Ð’Ð»Ð°Ð´Ð¸ÑÐ»Ð°Ð² Ð“Ñ€Ð°Ð¼. ÐšÐ¾ÑƒÑ‡. ÐÐ›ÐŸ -ÐŸÑ€Ð°ÐºÑ‚Ð¸Ðº. Ðž ÐºÑƒÑ€ÑÐµ Â«ÐšÐ¾ÑƒÑ‡Ð¸Ð½Ð³: ÐºÑƒÑ€Ñ Ñ‡ÑƒÐ´ÐµÑ Ð´Ð»Ñ . P.S. Ð’Ð¾ÑÐµÐ¼ÑŒ Ð¼ÐµÑÑÑ†ÐµÐ² Ð½Ð°Ð·Ð°Ð´ Ñ Ð²Ñ€ÑÐ´ Ð»Ð¸ Ð½Ð°Ð¸ÑÐ°Ð» Ð±Ñ‹ Ð¾Ñ‚Ð·Ñ‹Ð² Ð² Ñ‚Ð°ÐºÐ¾Ð¹ Ñ„Ð¾Ñ€Ð¼Ðµ :)) Ð¸ Ð´Ð»Ñ

34. #### MaudeUnoge

/  2016-08-16

Ð“Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñ‹ – Ð¼Ñ‹ Ð·Ð½Ð°ÐµÐ¼ Ð²ÑÐµ Ð¾ Ð“Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñ‹. ÐÐ²Ñ‚Ð¾Ñ€ÑÐºÐ¸Ðµ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñ‹ Ð°ÑÑ‚Ñ€Ð¾Ð»Ð¾Ð³Ð° Ð Ð¾Ð¼Ð°Ð½Ð° ÐÐµÑ‡Ð°ÐµÐ²Ð°: Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ Ð½Ð° Ð³Ð¾Ð´, . Ð›ÑŽÐ±Ð¸Ð¼Ñ‹Ðµ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñ‹ – Ð² Ð½Ð¾Ð²Ð¾Ð¼ Ð¾ÐºÐ½Ðµ

35. #### Coreymica

/  2016-08-16

Ð‘ÐµÑÐ¿Ð»Ð°Ñ‚Ð½Ð¾ ÑÐºÐ°Ñ‡Ð°Ñ‚ÑŒ Ð¸Ð³Ñ€Ñƒ Ð¯Ð´ÐµÑ€Ð½Ñ‹Ð¹ ÑˆÐ°Ñ€ 2 Ð½Ð° ÐºÐ¾Ð¼Ð¿ÑŒÑŽÑ‚ÐµÑ€ Ð±ÐµÐ· ÑˆÐ°Ñ€ Ð¶ÐµÐ»Ð°Ð½Ð¸Ð¹ ÑÐºÐ°Ñ‡Ð°Ñ‚ÑŒ Ð½Ð° – Ð¨Ð°Ñ€ Ð¶ÐµÐ»Ð°Ð½Ð¸Ð¹

36. #### TarraSpise

/  2016-08-16

Ñ‚Ð°Ðº ÐºÐ°Ðº Ð¼Ð¸Ð¼Ð¸ÐºÐ° Ð¸ Ð¶ÐµÑÑ‚Ñ‹ Ñ‡Ð°Ñ‰Ðµ Ð²ÑÐµÐ³Ð¾ Ð½ÐµÐ¿Ñ€Ð¾Ð¸Ð·Ð²Ð¾Ð»ÑŒÐ½Ñ‹ Ð° Ð¿Ð¾Ñ‚Ð¾Ð¼Ñƒ Ð¿Ñ€Ð°Ð²Ð´Ð¸Ð²Ñ‹ Ð¢Ð°ÐºÐ¸Ð¼ Ð¾. ÐÐ°Ð·Ð²Ð°Ð½Ð¸Ðµ: Ð¥Ð¸Ñ€Ð¾Ð¼Ð°Ð½Ñ‚Ð¸Ñ . Ð Ð°ÑÑˆÐ¸Ñ„Ñ€Ð¾Ð²ÐºÐ° ÐºÐ¾Ð´Ð° Ñ‡ÐµÐ»Ð¾Ð²ÐµÐºÐ° Ð¿Ð¾ ÐµÐ³Ð¾ Ñ€ÑƒÐºÐµ

37. #### Eloisanob

/  2016-08-16

Ð¤Ð¸ÑˆÐºÐ¸Ð½Ð° ÐšÐ°Ñ€Ñ‚Ð¸Ð½ÐºÐ°. Ð¢ÐµÐ¼Ð°: ÐŸÑ€ÐµÐ´ÑÐºÐ°Ð·Ð°Ð½Ð¸Ñ Ð’Ð°Ð½Ð³Ð¸ (2 Ñ„Ð¾Ñ‚Ð¾) Ð”Ð»Ñ Ð²Ð¾Ð·Ð¼Ð¾Ð¶Ð½Ð¾ÑÑ‚Ð¸ ÐºÐ¾Ð¼Ð¼ÐµÐ½Ñ‚Ð¸Ñ€Ð¾Ð²Ð°Ñ‚ÑŒ Ð½Ð¾Ð²Ð¾ÑÑ‚Ð¸

38. #### NakitaSuise

/  2016-08-16

Ð˜Ð³ÑƒÐ¼ÐµÐ½ n ÐžÐ± Ð¾Ð´Ð½Ð¾Ð¼ Ð´Ñ€ÐµÐ²Ð½ÐµÐ¼ ÑÑ‚Ñ€Ð°Ñ…Ðµ ÐšÐ¾Ð³Ð¾ Ð¸ ÐºÐ°Ðº Â«Ð¿Ð¾Ñ€Ñ‚ÑÑ‚Â» ÐºÐ¾Ð»Ð´ÑƒÐ½Ñ‹ ÐŸÐ¾ Ð±Ð»Ð°Ð³Ð¾ÑÐ»Ð¾Ð²ÐµÐ½Ð¸ÑŽ Ð¡Ð²ÑÑ‚ÐµÐ¹ÑˆÐµÐ³Ð¾

39. #### Vestasmasy

/  2016-08-17

Ð ÐµÐ·ÐµÑ€Ð²Ñ‹ Ð·Ð´Ð¾Ñ€Ð¾Ð²ÑŒÑ Ð´Ð¾ÑÑ‚Ð°Ñ‚Ð¾Ñ‡Ð½Ñ‹. Ð£ÑÐ¿ÐµÑ… Ð±ÑƒÐ´ÐµÑ‚ Ñ‚Ð°Ð¼, Ð³Ð´Ðµ Ð½Ð° ÑÐ»ÐµÐ´ÑƒÑŽÑ‰ÑƒÑŽ Ð½ÐµÐ´ÐµÐ»ÑŽ. Ð—Ð¾Ð´Ð¸Ð°ÐºÐ°Ð»ÑŒÐ½Ñ‹Ð¹ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ Ð½Ð° ÑÐ»ÐµÐ´ÑƒÑŽÑ‰ÑƒÑŽ Ð½ÐµÐ´ÐµÐ»ÑŽ Ñ 2 Ð¿Ð¾ 8 Ð¸ÑŽÐ½Ñ 2014 Ð³Ð¾Ð´Ð°.

/  2016-08-17

Ð­Ñ‚Ð¾ Ð»Ð¸ÑˆÑŒ Ð½ÐµÐºÐ¾Ñ‚Ð¾Ñ€Ñ‹Ðµ Ð¿Ñ€ÐµÐ´ÑÐºÐ°Ð·Ð°Ð½Ð¸Ñ , ÐºÐ¾Ñ‚Ð¾Ñ€Ñ‹Ðµ ÑÐ´ÐµÐ»Ð°Ð»Ð° Ð² Ð¸Ð½Ñ‚ÐµÑ€Ð²ÑŒÑŽ " Ð“Ð¾Ð»Ð¾ÑÑƒ Ð Ð¾ÑÑÐ¸Ð¸ Ð½Ð°Ñ‡Ð°Ð»Ð¾ Ð½Ð¾Ð²Ð¾Ð¹ ÑÐ¿Ð¾Ñ…Ð¸, ÑƒÐ¶Ðµ Ð¿Ñ€Ð¾Ð¸Ð·Ð¾ÑˆÐ»Ð¸ Ð² 2013 Ð³Ð¾Ð´Ñƒ .

41. #### Karmenoxini

/  2016-08-17

Ð¾Ð½ Ð¾Ð±Ð½Ð¾Ð²Ð»ÑÐµÑ‚ÑÑ ÐµÐ¶ÐµÑÑƒÑ‚Ð¾Ñ‡Ð½Ð¾ ÐºÐ°Ðº Ð¼Ð¸Ð½Ð¸Ð¼ÑƒÐ¼. Ð¢ÐµÐ¼Ð°, Ð Ð°Ð·Ð´ÐµÐ», ÐÐ²Ñ‚Ð¾Ñ€, Ð”Ð°Ñ‚Ð° . BSOD (Ð¡Ð¸Ð½Ð¸Ð¹ ÑÐºÑ€Ð°Ð½ ÑÐ¼ÐµÑ€Ñ‚Ð¸ ) Ð¿Ð¾ÑÐ»Ðµ Ð·Ð°Ð¿ÑƒÑÐºÐ° Dr.Web CureIt BSOD ÐŸÐ¾ÑÐ»Ðµ Ð¿Ñ€Ð¾Ð²ÐµÑ€ÐºÐ¸ ÑƒÑ‚Ð¸Ð»Ð¸Ñ‚Ð¾Ð¹ Ð¾Ñ‚ Ð”Ñ€Ð’ÐµÐ±Ð° Ð²Ñ‹Ð¿Ð°Ð´Ð°ÐµÑ‚ BSOD, Ð²Ð¸Ð½Ð´Ð° Ð½Ðµ Ð³Ñ€ÑƒÐ·Ð¸Ñ‚ÑÑ.

42. #### EarnestKn

/  2016-08-17

ÐžÐ± ÑÑ‚Ð¾Ð¼ Ð½Ð° ÑÐ²Ð¾ÐµÐ¹ ÑÑ‚Ñ€Ð°Ð½Ð¸Ñ†Ðµ Ð² ÑÐ¾Ñ†Ð¸Ð°Ð»ÑŒÐ½Ð¾Ð¹ ÑÐµÑ‚Ð¸ Â«FacebookÂ» ÑÐ¾Ð¾Ð±Ñ‰Ð°ÐµÑ‚ .. ÐÐ›Ð•ÐšÐ¡ÐÐÐ”Ð  Ð¨Ð•ÐŸÐ¡ : ÐšÐÐš Ð¡ ÐŸÐžÐœÐžÐ©Ð¬Ð® Ð¡Ð’Ð•Ð§Ð•Ð™ ÐŸÐ Ð˜ÐœÐÐÐ˜Ð¢Ð¬

43. #### Johnettem

/  2016-08-17

Ð›ÑŽÐ±Ð¾Ð²Ð½Ñ‹Ð¹ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ ÑÐºÐ¾Ñ€Ð¿Ð¸Ð¾Ð½ Ð¸ Ð±Ð»Ð¸Ð·Ð½ÐµÑ†Ñ‹ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿ Ð½Ð° 2010 Ð³Ð¾Ð´ ÑÑ‚Ñ€ÐµÐ»ÐµÑ† ÐºÐ¾Ð·Ð° Ñ…Ð¾Ñ€Ð¾ÑˆÐ¸Ðµ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñ‹

44. #### Shastatob

/  2016-08-17

ÐŸÑ€Ð¸Ð²Ð¾Ñ€Ð¾Ñ‚ Ð»ÑŽÐ±Ð¸Ð¼Ð¾Ð³Ð¾ Ð½Ð° Ð»ÑŽÐ±Ð¸Ð¼Ð¾Ð³Ð¾ Ð½Ð° Ð²Ð¾Ð·Ð²Ñ€Ð°Ñ‚ Ð¿Ð¾ Ñ„Ð¾Ñ‚Ð¾Ð³Ñ€Ð°Ñ„Ð¸Ð¸ ÑÐ°Ð¼Ð¾ÑÑ‚Ð¾ÑÑ‚ÐµÐ»ÑŒÐ½Ð¾ Ð¿Ð¾Ð´ ÑÐ²Ð¾Ð¹ Ð¿Ð¾Ñ€Ð¾Ð³

45. #### GussieKah

/  2016-08-17

Gadanie_pasyans_onlain. ÑÑ‚Ð°Ñ€Ð¸Ð½Ð½Ñ‹Ð¹ Ð¿Ð°ÑÑŒÑÐ½Ñ Ð¾Ð½Ð»Ð°Ð¹Ð½ Ð³Ð°Ð´Ð°Ð½Ð¸Ðµ . none Ð˜Ð³Ñ€Ð°Ð»ÑŒÐ½Ñ‹Ðµ ÐºÐ°Ñ€Ñ‚Ñ‹ Ð² ÑÑ‚Ð°Ñ€Ð¸Ð½Ð½Ð¾Ð¼ Ñ€ÑƒÑÑÐºÐ¾Ð¼

/  2016-08-17

Ð¡Ð¾Ð²Ð¼ÐµÑÑ‚Ð¸Ð¼Ð¾ÑÑ‚ÑŒ Ð±Ð»Ð¸Ð·Ð½ÐµÑ†Ñ‹ ÑÑ‚Ñ€ÐµÐ»ÐµÑ† Ð¿Ð¾ Ð³Ð¾Ñ€Ð¾ÑÐºÐ¾Ð¿Ñƒ Ð±ÐµÑÐ¿Ð»Ð°Ñ‚Ð½Ð¾. Ð’ Ð¿Ð°Ñ€Ðµ Ð±Ð»Ð¸Ð·Ð½ÐµÑ†Ñ‹ Ð¼ÑƒÐ¶Ñ‡Ð¸Ð½Ð°, ÑÑ‚Ñ€ÐµÐ»ÐµÑ† Ð¶ÐµÐ½Ñ‰Ð¸Ð½Ð° ÑÑ‚Ð¾ Ð¿Ñ€Ð¾ÑÐ²Ð»ÑÐµÑ‚ÑÑ Ð¾ÑÐ¾Ð±ÐµÐ½Ð½Ð¾ Ð½Ð°Ð³Ð»ÑÐ´Ð½Ð¾.

47. #### CamiTweni

/  2016-08-17

Ð¢Ñ€ÐµÑ‚Ð¸Ð¹ Ð³Ð»Ð°Ð·, Ð¾Ñ‚ÐºÑ€Ð¾Ð¹ÑÑ! Ð–ÐµÐ½Ñ‰Ð¸Ð½Ñ‹ Ð½Ðµ Ð´Ð°Ð´ÑƒÑ‚ ÑÐ¾Ð²Ñ€Ð°Ñ‚ÑŒ: Ð¸Ð½Ñ‚ÑƒÐ¸Ñ†Ð¸Ñ Ñ€ÐµÐ´ÐºÐ¾ Ð¿Ð¾Ð´Ð²Ð¾Ð´Ð¸Ñ‚, Ð¿Ñ€Ð°Ð²Ð´Ð°, ÐµÑÐ»Ð¸ Ð¼Ñ‹

48. #### Nilajeolype

/  2016-08-17

ÐÐ°Ð¹Ð´ÐµÐ½Ð¾ 1 ÑÐ¾Ð¾Ð±Ñ‰ÐµÐ½Ð¸Ð¹. CÐ¾Ð¾Ð±Ñ‰ÐµÐ½Ð¸Ñ Ñ Ð¼ÐµÑ‚ÐºÐ¾Ð¹. ÑÐºÐ°Ñ‡Ð°Ñ‚ÑŒ ÑÐ¾Ð½Ð½Ð¸Ðº Ð²ÐµÑ‰Ð¸ Ð·Ð°Ð±Ñ‹Ñ‚ÑŒ – Ð¡Ð°Ð¼Ð¾Ðµ Ð¸Ð½Ñ‚ÐµÑ€ÐµÑÐ½Ð¾Ðµ Ð² Ð±Ð»Ð¾Ð³Ð°Ñ…. Ð¡Ð»ÐµÐ´ÑƒÑŽÑ‰Ð¸Ðµ 10 Â» · Ð¡Ð»ÐµÐ´ÑƒÑŽÑ‰Ð¸Ðµ 10 Â». <ÑÐºÐ°Ñ‡Ð°Ñ‚ÑŒ